Unboxing and Cable Hookup¶

Note

This section uses a G3BNG development kit as an example. Other modules will have similar components, but they may not match exactly.

G3BNG Development Kit Contents¶

Use this list to confirm that you’ve received everything in your kit:

G3BNG Touch Screen Module¶

../_images/51-0601-001_front_med_600.png — LCD Panel (front) - 7” Resistive In This Example¶

../_images/51-0601-001_back_med_600.png — Controller PCBA (back)¶

Part# 23-0160-18 –– Power/RS-232 “Y” Cable (5VDC)1 ¶

— AND —

Part# 30-0008-01 –– 5 VDC Power Supply1 ¶

DB-9 RS-232 serial connector, female (1)
5.5mm x 2.5mm barrel 5VDC power connector, female (1)
8-pin Pico-SPOX wire-to-board connector (1)

../_images/23-0160-18_med.png — “Y” Cable - Power/RS-232 (5VDC)¶

AC mains cord, 1250W, 125V, 10A, 2-prong, 59in/1.5m length, Figure 8 plug (1)

../_images/30-0008-01_med.png — 5VDC Power Brick¶

— OR —

Part# 23-0160-18 –– Power/RS-232 “Y” Cable (12VDC)2 ¶

— AND —

Part# 30-0017-01 –– 12 VDC Power Supply2 ¶

DB-9 RS-232 serial connector, female (1)
5.5mm x 2.1mm barrel 5VDC power connector, female (1)
8-pin Pico-SPOX wire-to-board connector (1)

AC mains cord, 1250W, 125V, 10A, 3-prong, 59in/1.5m length, IEC plug (1)

../_images/30-0017-01_med_600.png — 12VDC Power Brick¶

Part# 23-0161-72 –– USB Debug Interface Cable¶

../_images/23-0161-72_med.png — USB Debug Interface Cable¶

Part# 37-0008-01 –– USB to RS-232 Adapter and USB Cable¶

DB-9 RS-232 male to USB mini type-B female adapter (1)
USB type-A male to USB mini type-B male cable (1)

../_images/37-0008-01_med.png — USB to RS-232 Adapter and Cable¶

Part# 23-0166-12 –– USB Type-A Adapter Cable¶

Part# 23-0167-12 –– USB OTG Type-A Adapter Cable (Host Port)¶

Part# 23-0168-12 –– USB OTG Type-A Adapter Cable (Device Port) (not shown)¶

../_images/23-0166-12_23-0167-12_med.png — USB Host Port Cables¶

Part# 23-0148-12 –– Ethernet Cable (Shielded, 12 in.)¶

../_images/23-0148-12_med.png — Shielded Ethernet Cable¶

Part# 37-0012-01 –– RJ-45 Cat 5e Ethernet Inline Coupler¶

../_images/37-0012-01_med.png — Ethernet Gender Bender¶

Part# 37-0010-01 –– 8GB MicroSDHC Card¶

../_images/37-0010-01_med.png — *8GB MicroSDHC Card*¶

Part# 37-0011-01 –– USB MicroSDHC Card Reader/Writer¶

../_images/37-0011-01_med.png — USB MicroSDHC Card Reader/Writer¶

Part# 37-0013-01 –– USB WiFi Adapter¶

../_images/37-0014-01_med.png — USB WiFi Dongle¶

Flying Leads¶

Various Pico-blade and Pico-SPOX connectors with flying leads are provided with the development kit to facilitate initial integration with your system hardware.

Part# 23-0144-10 –– Flying Leads, GPIO (Audio on G3BNG Only)¶

Part# 23-0145-10 –– Flying Leads, RS-485¶

Part# 23-0146-10 –– Flying Leads, CAN¶

Part# 23-0147-10 –– Flying Leads, Power/RS-232¶

Part# 23-0149-10 –– Flying Leads, I²C/UART (+GPIO on G3BNG Only)¶

../_images/flying-leads_med_600.png — Assorted & Sundry Flying Leads¶

Important

If anything from the list above is missing, please contact Reach Technology by sending email to techsupport@reachtech.com.

Footnotes:

1(1,2): The 5VDC supply works with the 5.7” panels and some 7” panels.
2(1,2): The 12VDC supply works with some 7” panels, the 10.1” panels, the 10.4” panel and the 12.1” panels.